Steelcase positions the Series 1 as the model that brings its main design ideas to a broader group of buyers. Its own sheet says the chair keeps what people value in a chair while making it attainable. In our lineup it is the simplest way into the brand, which is why we rank it fifth. We do not test chairs, so the figures below come from Steelcase’s current product page and an older Steelcase specification sheet, and we say so when a number is missing.
This product is not a medical device and does not replace advice from a healthcare professional. Read the manufacturer's instructions before first use.
Which Series 1 Is This?
The Amazon listing is the Steelcase Series 1 in graphite, labeled for carpet floors. Steelcase offers it with a choice of backs, seat materials and options:
- 3D Microknit back: a knit back with internal flexors, according to Steelcase’s page
- Air Back: a polypropylene back with a geometric wave pattern
- Seat: fabric, leather or vinyl
- Options: height-adjustable or armless versions, a stool, an adjustable headrest and a coat hanger, according to Steelcase’s sheet
Confirm the back type and options on the listing.
The Adjustments
Steelcase’s page and its 2018 sheet list the following:
- Seat height and depth. The page says the seat is height- and depth-adjustable. The 2018 sheet lists a seat height from the floor of 16.5 to 21.5 inches, a seat depth of 18.5 inches and a functional seat depth of 15.75 to 18 inches.
- Arms. Standard 4D arms that adjust in height, width, depth and pivot. The sheet lists an arm height from the seat of 6.5 to 11.5 inches, a width between the arms of 16 to 20 inches and an arm cap pivot of 40 degrees in or out.
- Lumbar. Adjustable lumbar support is standard, according to the page. The 2018 sheet gives a lumbar height of 6.5 to 8.75 inches. Steelcase says fixed lumbar is available on the 3D Microknit back only.
- Recline. The page lists a full recline range, a boost setting that adds 20 percent more back tension, and an upright back stop. The 2018 sheet gives an angle between seat and back of 100 to 124 degrees.
- Weight-activated mechanism. Steelcase’s sheet says this allows quick, intuitive seat adjustments. In plain terms, the chair senses your weight and sets the recline tension to match, instead of making you turn a knob for the base setting.
What Is Missing Compared With the Leap
The Series 1 leaves out a few things you will find on the Leap. In Steelcase’s materials we found no separate lower back firmness dial, no five-position variable back stop, and no flexible seat edge comparable to the Leap’s. Steelcase’s sheet instead lists adaptive bolstering, which it says lets the seat conform to the user’s shape. It is a simpler chair, which many buyers will count as an advantage: fewer controls to learn.
The Back and Frame
The 2018 sheet says the 3D Micro Knit back has integrated LiveBack technology with flexors tucked inside the backrest, which Steelcase says flex with your movement. We make no claim about any effect on the body. The sheet lists a back height from the seat of 21.5 inches, which is shorter than the Leap’s 25 inches. If you are tall and want a taller back, consider the optional headrest.
Overall size on the 2018 sheet is 21 to 23.75 inches deep, 23.5 to 27 inches wide and 36.5 to 41.25 inches tall. Steelcase’s page describes a polished aluminum base, and describes the chair as shipping ready to assemble, which it says reduces transport emissions.
Casters
Steelcase’s page says hard casters are standard, with soft dual-wheel roll-control casters as an option, and glides also offered. Hard casters are the kind meant for carpet, and soft casters are meant for hard floors and chair mats. Since the Amazon listing is labeled for carpet floors, put a chair mat under it if your floor is wood, tile or vinyl. OSHA’s workstation guidance says a chair should have a five-leg base with casters suited to the floor.
Weight Rating and Warranty
- Weight rating: the page says the chair supports up to 400 lbs, and the stool up to 300 lbs.
- Warranty: a Steelcase Limited Lifetime warranty, described as 12 years, multi-shift, 24/7 parts and labor.
- Sustainability: the page says an optional CarbonNeutral product certification is available and cites a 43 percent lower carbon footprint and 30 percent more recycled content than an earlier version, based on a 2023 environmental product declaration.
We found conflicting weight figures in other Steelcase material, so if you are near the top of the range, confirm it with Steelcase or the seller before ordering.
Fit: Who It Suits
Steelcase does not publish a user height range for the Series 1 on the pages we opened, so we do not give one. What we can give you is the hardware. The 2018 sheet lists a seat height of 16.5 to 21.5 inches and a functional seat depth of 15.75 to 18 inches. OSHA’s guidance says a seat height is right when the entire sole of the foot can rest on the floor, and that the seat pan should let taller users have thigh support while letting shorter users keep their backs against the backrest. The Series 1’s seat depth range is about 2.25 inches, narrower than the Leap’s 3 inches, so check that it suits the length of your thigh. The seat starts at 16.5 inches, so shorter buyers may need a footrest to get their feet flat.
Pros and Cons
Pros
- Weight-activated mechanism, seat depth, adjustable lumbar and 4D arms
- 400 lb weight rating on Steelcase’s page
- Hard casters standard and soft casters optional
- Steelcase Limited Lifetime warranty
- Options for a headrest, a coat hanger, a stool and different backs
- Fewer controls to learn
Cons
- No separate back firmness dial in the materials we found
- A shorter back than the Leap
- Detailed dimensions come from an older sheet
- Seat height starts at 16.5 inches
Who Should Buy the Steelcase Series 1
- Buyers who want a Steelcase chair with fewer controls than the Leap or Gesture.
- Home-office buyers who like simple controls.
- People who want a rating of 400 lbs from a major maker.
Who Should Look Elsewhere
- Buyers who want the most adjustments. The Steelcase Leap profile lists a lumbar height range, a back firmness dial and a 3-inch seat depth range.
- Mesh fans on a mid-range budget. The Branch Ergonomic Chair Pro profile covers a mesh chair with a 275 lb rating.
- Anyone who wants a taller back. Consider the headrest option or a different chair.
Checking the Amazon Listing
- Model name. It should say Series 1, not a stool.
- Back type. Check whether it has the 3D Microknit or the Air Back.
- Arms. Make sure they are the 4D version.
- Casters. The listing is labeled for carpet floors.
- Seller. Look for Steelcase or an authorized dealer.
Because we do not list prices on this site, use the button below to see the current price on Amazon.
Bottom Line
The Steelcase Series 1 is a simple, adjustable chair with 4D arms, adjustable lumbar, a weight-activated mechanism and a 400 lb rating on Steelcase’s page. Its warranty is Steelcase’s Limited Lifetime terms, covering 12 years of parts and labor. It has fewer adjustments than the Leap or the Gesture, and its dimensions come from an older sheet, but it is the simplest way in for buyers who want Steelcase.
See price on Amazon
For a side-by-side look at how it stacks up against the other nine chairs on capacity, seat height and warranty, read our 2026 office chair comparison.
Sources